SB-Acoustics SW26SFC38-4

10″ SW26SFC38-4 Shallow subwoofer
Beschikbaarheid:: 2 op voorraad
Artikelnummer voorraad referentie: 1382536
Fabrikant: SB-Acoustics
€82,60 incl. BTW
Exclusief verzenden

FEATURES:

  • Shallow light weight design
  • Hard pressed vented paper cone (made in-house)
  • Inverted low damping rubber surround
  • Symmetric suspension
  • Stacked neodymium motor with built-in soft limiting
  • Non-conducting fiber glass coil former
  • long life lead wires

SPECS:

  • Nominal impedance, 4 Ω
  • DC resistance, Re 3.5 Ω
  • Voice coil inductance, Le 1.27 mH
  • Effective piston area, Sd 340 cm2
  • Voice coil diameter 38.5 mm
  • Voice coil height 16 mm
  • Air gap height 9 mm
  • Linear coil travel (p-p) 7 mm
  • Magnetic flux density 0.72 T
  • Magnet weight 0.1 kg
  • Net weight 0.94 kg
  • Free air resonance, Fs 27 Hz
  • Sensitivity (2.83 V / 1 m) 91.5 dB
  • Mechanical Q-factor, Qms 4.94
  • Electrical Q-factor, Qes 0.30
  • Total Q-factor, Qts 0.29
  • Moving mass incl.air, Mms 64 g
  • Force factor, BI 11.2 Tm
  • Equivalent volume, Vas 88 liters
  • Compliance, Cms 0.54 mm/N
  • Mechanical loss, Rms 2.2 kg/s
  • Rated power handling* 80 W

* IEC 268-5, T/S parameters measured on drive units that are broken in.


Je kunt alle uitgebreide technische gegevens vinden op het datablad, download dan onze PDF 
Product Informatie PDF


FEATURES:

  • Shallow light weight design
  • Hard pressed vented paper cone (made in-house)
  • Inverted low damping rubber surround
  • Symmetric suspension
  • Stacked neodymium motor with built-in soft limiting
  • Non-conducting fiber glass coil former
  • long life lead wires

SPECS:

  • Nominal impedance, 4 Ω
  • DC resistance, Re 3.5 Ω
  • Voice coil inductance, Le 1.27 mH
  • Effective piston area, Sd 340 cm2
  • Voice coil diameter 38.5 mm
  • Voice coil height 16 mm
  • Air gap height 9 mm
  • Linear coil travel (p-p) 7 mm
  • Magnetic flux density 0.72 T
  • Magnet weight 0.1 kg
  • Net weight 0.94 kg
  • Free air resonance, Fs 27 Hz
  • Sensitivity (2.83 V / 1 m) 91.5 dB
  • Mechanical Q-factor, Qms 4.94
  • Electrical Q-factor, Qes 0.30
  • Total Q-factor, Qts 0.29
  • Moving mass incl.air, Mms 64 g
  • Force factor, BI 11.2 Tm
  • Equivalent volume, Vas 88 liters
  • Compliance, Cms 0.54 mm/N
  • Mechanical loss, Rms 2.2 kg/s
  • Rated power handling* 80 W

* IEC 268-5, T/S parameters measured on drive units that are broken in.


Je kunt alle uitgebreide technische gegevens vinden op het datablad, download dan onze PDF 
Product Informatie PDF


Schrijf uw eigen beoordeling
  • Alleen geregistreerde gebruikers kunnen een beoordeling schrijven
*
*
Slecht
Uitstekend
Klanten die dit kochten, kochten ook.

Audyn 3.30 Ohm 4 Watt MOX

3.30 Ohm 4 Watt MOX
€0,58 incl. BTW €0,91 incl. BTW
Exclusief verzenden

Audyn 10.0 Ohm 4 Watt MOX

10.0 Ohm 4 Watt MOX
€0,91 incl. BTW
Exclusief verzenden

Audyn 1.00 Ohm 4 Watt MOX

1.00 Ohm 4 Watt MOX
€0,91 incl. BTW
Exclusief verzenden

5.60 mH correctie-spoel HQR32

5.60 mH correctie-spoel HQR32
€6,86 incl. BTW
Exclusief verzenden

Jantzen EleCap 33,0 µF 5% 100VDC dia-13/27 mm

33,0 µF 5% 100VDC dia-13/27 mm
€1,78 incl. BTW
Exclusief verzenden

Jantzen EleCap 100,0 µF 5% 100VDC dia-16/34 mm

100,0 µF 5% 100VDC dia-16/34 mm
€3,12 incl. BTW
Exclusief verzenden
Product beoordelingen
Alleen geregistreerde gebruikers kunnen een beoordeling schrijven