Scan Speak Illuminator R3004/6620.00
1'' Illuminator Ring Dome Tweeter - AirCirc - Black - 4 ohm
Beschikbaarheid:: 2 op voorraad
Artikelnummer voorraad referentie: 7366210
The Illuminator tweeters continue on with the heritage of the renowned Revelator D29. The large-roll surround and textile dome diaphragm provide a flat frequency response to above 30KHz with outstanding off-axis dispersion.
The face plates are die cast in aluminum for a beautiful look with maximum mechanical stability.
R3004 builds on the experience of the one-inch R29 ring radiator, resulting in low resonance frequency, superb vocal rendition and excellent imaging at all listening locations.
Tymphany’s unique AirCirc Magnet System -- named for the way it optimizes air flow within the chamber – rearranges the traditional magnet structure from a single magnet to an open magnetic circuit comprised of six separate neodymium slugs. This, in combination with the chamber, results in the elimination of the reflections and resonances that compromise the performance of traditional motors.
Driver Highlights: 1" Ring Radiator, AirCirc Magnet System, Rubber painted aluminium die casted faceplate, Black
Driver HighLights:
- 1" Ring Radiator
- AirCirc Magnet System
- Rubber painted aluminium die casted faceplate
- Black.
Als u deze gegevens liever wilt uitprinten of voor offline gebruik, download dan ons PDF bestand.
Specs
Electrical Data
| Zn 4 Ohm |
| Zmin - Ohm |
| Zo - Ohm |
| Re 3 Ohm |
| Le 0.03 mH |
TS Parameters
| Fs 520 Hz |
| Qms |
| Qes |
| Qts |
| Bl 2.3 Tm |
| Rms - Kg/s |
| Mms 0.3 g |
| Cms - mm/N |
| |
| Sd 5,6 cm^2 |
| Vas - ltrs |
| 90.4 dB |
Power Handling
- 100h RMS noise test (IEC)
| - W |
- Long-term Max Power (IEC 18.3)
| - W |
- Short-term Max Power (IEC 18.3)
| - W |
Voice Coil and Magnet Parameters
| - mm |
| - mm |
| - |
| - mm |
| - mm |
| - mm |
| - mm |
| - mm |
| - Kg |
Frequency
Mechanical Dimensions
Drawing Dimensions
| Outside Diameter | OD 104.25 mm |
| Magnet Diameter | MD mm |
| Cutout Diameter | CD83 mm |
| Interior Depth | ID 25 mm |
| Hole Diameter | HD 4,2 mm |
.