L16RN-SL is a 5” High Fidelity woofer with an injection moulded metal chassis, specially designed in cooperation with Linkwitz Labs in Corte Medera, California. It is specified for use in the Linkwitz "Pluto" omni-directional loudspeaker, but can also be used in standard bass reflex and transmission line designs.
Stiff, yet light aluminum cone and low loss rubber surround show no sign of the familiar 500-1500 Hz cone edge resonance and distortion assosiated with soft cones.
A bumped back plate in the magnet system, together with the very long and light weight copper clad aluminum voice coil, allow extreme coil excursion with low distortion.
A heavy copper ring below the T-shaped pole piece reduces non linear and modulation distortion.
Extremely stiff and stable injection moulded metal basket, keeps the critical components in perfect alignment. Large windows in the basket both above and below the spider reduce sound reflection, air flow noise and cavity resonance to a minimum.
This driver uses Seas SpiderRing® technology.
Als u deze gegevens liever wilt uitprinten of voor offline gebruik, download dan onze PDF
Specs
Electrical Data
| Zn 8 ohm |
| Re 6.0 ohm |
| Le 0.64 mH |
TS Parameters
| Fs 37 Hz |
| Bl 6.1 N/A |
| Mms 14.7 g |
| Sd 104 cm^2 |
| 2.83V/1m 84 dB |
Power Handling
| IEC 268-5 80 W |
- Short-term Power handling
| EC 268-5 250 W |
Voice Coil and Magnet Parameters
| 39 mm |
| 18 mm |
| 6 mm |
| 12 mm |
- Magnetic Gap Flux Density
| 0.88 T |
| 4200 g |
| 1.4 Kg |
Misc
- Recommended Frequency Range
| 45 - 2000 Hz |
Frequency
Mechanical Dimensions
.