Scan Speak Revelator D2905/9900.00

1'' Revelator Dome Tweeter - Large Face Plate - 6 ohm
Beschikbaarheid:: Niet op voorraad: indien weer op voorraad, zal deze in een keer uit voorraad worden verzonden
Artikelnummer voorraad referentie: 7309900
Fabrikant: Scan Speak Revelator
€223,10 incl. BTW
Exclusief verzenden

The Revelator series has for years been celebrated for producing the best sounding electro dynamic transducers in the world. Since ScanSpeak was founded in 1970, the audio engineers and R&D experts working on the line have been on a quest to create drivers that reveal all the sound in recordings, hiding nothing from the listener. This quest has resulted in several revolutionary inventions that remove distortion in the magnet systems and in the moving parts of the speaker. The philosophy is that the sound has to be very dynamic, giving a perfect transient response and providing tonal balance. In the Revelator tweeters, additional enhancements have been made to reduce distortion and power compression, and to optimize airflow in the chambers, producing several unique tweeter designs.

Driver Highlights: 1" soft dome, SD-2 motor, low compression design, non resonant chamber, machined aluminium faceplate

Als u deze gegevens liever wilt uitprinten of voor offline gebruik, download dan onze PDF
Product Informatie PDF


Specs

Electrical Data

 

  • Nominal Impedance
Zn 6 ohm
  • DC Resistance
Re 4.7 ohm
  • Voice Coil Inductance
Le 0.01 mH

TS Parameters

  • Resonance Frequency
Fs 500 Hz
  • Force Factor
Bl 3.5 Tm
  • Moving Mass
Mms 0.45 g
  • Effective Piston Area
Sd 8.5 cm^2
  • Sensitivity
2.83V/1m 91 dB

Power Handling

  • 100h RMS noise test
IEC 225 W

Voice Coil and Magnet Parameters

  • Voice Coil Diameter
28 mm
  • Linear Excursion +/-
0.1 mm
  • Max mech. excursion +/-
1.5 mm

Frequency
Frequency

 

Mechanical Dimensions

Mechanical Dimensions

 

Drawing Dimensions

  • Outside Diameter
OD 130 mm
  • Magnet Diameter
MD 73.5 mm
  • Interior Depth
ID 49 mm
  •  Hole Diameter
HD 5 mm
  •  Screw Circle Diameter
SD 110 mm

The Revelator series has for years been celebrated for producing the best sounding electro dynamic transducers in the world. Since ScanSpeak was founded in 1970, the audio engineers and R&D experts working on the line have been on a quest to create drivers that reveal all the sound in recordings, hiding nothing from the listener. This quest has resulted in several revolutionary inventions that remove distortion in the magnet systems and in the moving parts of the speaker. The philosophy is that the sound has to be very dynamic, giving a perfect transient response and providing tonal balance. In the Revelator tweeters, additional enhancements have been made to reduce distortion and power compression, and to optimize airflow in the chambers, producing several unique tweeter designs.

Driver Highlights: 1" soft dome, SD-2 motor, low compression design, non resonant chamber, machined aluminium faceplate

Als u deze gegevens liever wilt uitprinten of voor offline gebruik, download dan onze PDF
Product Informatie PDF


Specs

Electrical Data

 

  • Nominal Impedance
Zn 6 ohm
  • DC Resistance
Re 4.7 ohm
  • Voice Coil Inductance
Le 0.01 mH

TS Parameters

  • Resonance Frequency
Fs 500 Hz
  • Force Factor
Bl 3.5 Tm
  • Moving Mass
Mms 0.45 g
  • Effective Piston Area
Sd 8.5 cm^2
  • Sensitivity
2.83V/1m 91 dB

Power Handling

  • 100h RMS noise test
IEC 225 W

Voice Coil and Magnet Parameters

  • Voice Coil Diameter
28 mm
  • Linear Excursion +/-
0.1 mm
  • Max mech. excursion +/-
1.5 mm

Frequency
Frequency

 

Mechanical Dimensions

Mechanical Dimensions

 

Drawing Dimensions

  • Outside Diameter
OD 130 mm
  • Magnet Diameter
MD 73.5 mm
  • Interior Depth
ID 49 mm
  •  Hole Diameter
HD 5 mm
  •  Screw Circle Diameter
SD 110 mm
Schrijf uw eigen beoordeling
  • Product kan alleen worden beoordeeld nadat het is gekocht
  • Alleen geregistreerde gebruikers kunnen een beoordeling schrijven
*
*
Slecht
Uitstekend
Klanten die dit kochten, kochten ook.
Afbeeldingen van Jantzen 1 mH luchtspoel, draad Ø 1,8 mm = 13AWG, Re=0,198 Ω

Jantzen 1 mH luchtspoel, draad Ø 1,8 mm = 13AWG, Re=0,198 Ω

000-0118
High-purity copper wire baked in perfect shape to create a distortion-free inductor, for all audio applications. Modern self-supporting design, low tolerance and power handling dependent on the wire used, makes it the most versatile coil on the market.
€30,54 incl. BTW
Exclusief verzenden
Afbeeldingen van Jantzen 4,7 mH luchtspoel, draad Ø 0,8 mm = 20AWG, Re=2,19 Ω

Jantzen 4,7 mH luchtspoel, draad Ø 0,8 mm = 20AWG, Re=2,19 Ω

000-1935
High-purity copper wire baked in perfect shape to create a distortion-free inductor, for all audio applications. Modern self-supporting design, low tolerance and power handling dependent on the wire used, makes it the most versatile coil on the market.
€16,07 incl. BTW
Exclusief verzenden
Afbeeldingen van Jantzen 0,27 mH luchtspoel, draad Ø 1 mm = 18AWG, Re=0,266 Ω

Jantzen 0,27 mH luchtspoel, draad Ø 1 mm = 18AWG, Re=0,266 Ω

000-1208
High-purity copper wire baked in perfect shape to create a distortion-free inductor, for all audio applications. Modern self-supporting design, low tolerance and power handling dependent on the wire used, makes it the most versatile coil on the market.
€6,16 incl. BTW
Exclusief verzenden
Afbeeldingen van Jantzen Audio 4,7 uF Cross Cap MKP

Jantzen Audio 4,7 uF Cross Cap MKP

001-0250
4,7 uF Cross Cap MKP. 400Vdc 5% tolerantie
€2,69 incl. BTW
Exclusief verzenden
Afbeeldingen van Jantzen Audio 8,2 uF Cross Cap MKP

Jantzen Audio 8,2 uF Cross Cap MKP

001-0262
8,2 uF Cross Cap MKP. 400Vdc 5% tolerantie
€3,68 incl. BTW
Exclusief verzenden
Afbeeldingen van Jantzen Audio 15 uF Cross Cap MKP

Jantzen Audio 15 uF Cross Cap MKP

001-0268
15 uF Cross Cap MKP. 400Vdc 5% tolerantie
€6,98 incl. BTW
Exclusief verzenden
Product beoordelingen
Alleen geregistreerde gebruikers kunnen een beoordeling schrijven