Scan Speak Illuminator D2004/6020.00

3/4'' Illuminator Dome Tweeter - 4 ohm
Beschikbaarheid:: 2 op voorraad
Artikelnummer voorraad referentie: 7360100
Fabrikant: Scan Speak Illuminator
€107,40 incl. BTW
Exclusief verzenden

The Illuminator tweeters continue on with the heritage of the renowned Revelator D29. The large-roll surround and textile dome diaphragm provide a flat frequency response to above 30KHz with outstanding off-axis dispersion.

The face plates are die cast in aluminum for a beautiful look with maximum mechanical stability.

D2004/602000 is optimized to offer small package sizes that can fit into tight spaces such as compact cabinets and automotive trim pieces.

The back chamber is die cast in aluminium and designed with a contoured shape that functions as a heat sink in high power applications.

 

Driver HighLights:

  • 3/4 " soft dome
  • Compact size
  • Ring neodymium magnet
  • Aluminium faceplate and house
  • protective grill.

 

Als u deze gegevens liever wilt uitprinten of voor offline gebruik, download dan onze PDF
Product Informatie PDF

Specs

Electrical Data

  • Nominal Impedance 
Zn 4 Ohm
  • Minimum Impedance
Zmin 3.4 Ohm
  • Maximum Impedance
Zo 11.6 Ohm
  • DC Resistance 
Re 2.8 Ohm
  • Voice Coil Inductance
Le 0.02 mH

TS Parameters

  • Resonance Frequency
Fs 600 Hz
  • Mechanical Q factor
Qms 4.42
  • Electrical Q factor 
Qes 1.42
  • Total Q factor 
Qts 1.07
  • Force Factor
Bl 1.3 Tm
  • Mechanical Resistance
Rms 0.2 Kg/s
  • Moving Mass
Mms 0.22 g
  • Suspension compliance
Cms 0.32 mm/N
  • Effective cone diameter
 
  • Effective Piston Area
Sd 4.5 cm^2
  • Equivalent Volume
Vas - ltrs
  • Sensitivity 2.83V/1m
88.4 dB

Power Handling

  • 100h RMS noise test (IEC)
60 W
  • Long-term Max Power (IEC 18.3)
120 W
  • Short-term Max Power (IEC 18.3)
- W

Voice Coil and Magnet Parameters

  • Voice Coil Diameter 
19 mm
  • Voice coil height
1.8 mm
  • Voice coil layers
2
  • Height of the gap
2.50 mm
  • Linear Excursion +/-
0.4 mm
  • Max mech. excursion +/-
1.6 mm
  • Diameter of magnet
35.5 mm
  • Height of Magnet
4 mm
  • Weight of Magnet
- Kg

Frequency
Frequency

Mechanical Dimensions

Mechanical Dimensions

Drawing Dimensions

Outside DiameterOD 55,5 mm
Magnet DiameterMD  mm
Cutout DiameterCD 43 mm
Interior DepthID 29,3 mm
Hole DiameterHD 3,3 mm

The Illuminator tweeters continue on with the heritage of the renowned Revelator D29. The large-roll surround and textile dome diaphragm provide a flat frequency response to above 30KHz with outstanding off-axis dispersion.

The face plates are die cast in aluminum for a beautiful look with maximum mechanical stability.

D2004/602000 is optimized to offer small package sizes that can fit into tight spaces such as compact cabinets and automotive trim pieces.

The back chamber is die cast in aluminium and designed with a contoured shape that functions as a heat sink in high power applications.

 

Driver HighLights:

  • 3/4 " soft dome
  • Compact size
  • Ring neodymium magnet
  • Aluminium faceplate and house
  • protective grill.

 

Als u deze gegevens liever wilt uitprinten of voor offline gebruik, download dan onze PDF
Product Informatie PDF

Specs

Electrical Data

  • Nominal Impedance 
Zn 4 Ohm
  • Minimum Impedance
Zmin 3.4 Ohm
  • Maximum Impedance
Zo 11.6 Ohm
  • DC Resistance 
Re 2.8 Ohm
  • Voice Coil Inductance
Le 0.02 mH

TS Parameters

  • Resonance Frequency
Fs 600 Hz
  • Mechanical Q factor
Qms 4.42
  • Electrical Q factor 
Qes 1.42
  • Total Q factor 
Qts 1.07
  • Force Factor
Bl 1.3 Tm
  • Mechanical Resistance
Rms 0.2 Kg/s
  • Moving Mass
Mms 0.22 g
  • Suspension compliance
Cms 0.32 mm/N
  • Effective cone diameter
 
  • Effective Piston Area
Sd 4.5 cm^2
  • Equivalent Volume
Vas - ltrs
  • Sensitivity 2.83V/1m
88.4 dB

Power Handling

  • 100h RMS noise test (IEC)
60 W
  • Long-term Max Power (IEC 18.3)
120 W
  • Short-term Max Power (IEC 18.3)
- W

Voice Coil and Magnet Parameters

  • Voice Coil Diameter 
19 mm
  • Voice coil height
1.8 mm
  • Voice coil layers
2
  • Height of the gap
2.50 mm
  • Linear Excursion +/-
0.4 mm
  • Max mech. excursion +/-
1.6 mm
  • Diameter of magnet
35.5 mm
  • Height of Magnet
4 mm
  • Weight of Magnet
- Kg

Frequency
Frequency

Mechanical Dimensions

Mechanical Dimensions

Drawing Dimensions

Outside DiameterOD 55,5 mm
Magnet DiameterMD  mm
Cutout DiameterCD 43 mm
Interior DepthID 29,3 mm
Hole DiameterHD 3,3 mm

Schrijf uw eigen beoordeling
  • Alleen geregistreerde gebruikers kunnen een beoordeling schrijven
*
*
Slecht
Uitstekend
PRIJS AANBIEDINGEN - Hoe meer u koopt, hoe meer u bespaart -
Hoeveelheid
2+
4+
Prijs
€107,40
€102,03
Product beoordelingen
Alleen geregistreerde gebruikers kunnen een beoordeling schrijven