Scan Speak Revelator 12M/4631G00

4'' Revelator Midrange - Sliced Paper Cone - 4 ohm
Beschikbaarheid:: Niet op voorraad: indien weer op voorraad, zal deze in een keer uit voorraad worden verzonden
Artikelnummer voorraad referentie: 7304631
Fabrikant: Scan Speak Revelator
€239,63 incl. BTW
Exclusief verzenden

The Revelator series has for years been celebrated for producing the best sounding electro dynamic transducers in the world. Since ScanSpeak was founded in 1970, the audio engineers and R&D experts working on the line have been on a quest to create drivers that reveal all the sound in recordings, hiding nothing from the listener. This quest has resulted in several revolutionary inventions that remove distortion in the magnet systems and in the moving parts of the speaker. The philosophy is that the sound has to be very dynamic, giving a perfect transient response and providing tonal balance. One of the latest inventions realized in the Revelator midrange design is the sliced paper cone, which reduces break-up modes in the membrane dramatically. The result is an undisputed clarity in sound.

Driver Highlights: Low loss suspension, Sliced paper cone, Compact linear motor system

Product Informatie PDF

Specs

Electrical Data

  • Nominal Impedance
    		• Zn 4 Ohm
  • DC Resistance
    		• Re 3.2 Ohm
  • Voice Coil Inductance
    		• Le 0.22mH

    TS Parameters

  • Resonance Frequency
    		• Fs 75 Hz
  • Mechanical Q factor
    		• Qms 5.57
  • Electrical Q factor
    		• Qes 0.35
  • Total Q factor
    		• Qts 0.33
  • Force Factor
    		• Bl 5.3 Tm
  • Mechanical Resistance
    		• Rms 0.55 Kg/s
  • Moving Mass
    		• Mms 6.5 g
  • Effective Piston Area
    		• sd 49 cm^2
  • Equivalent Volume
    		• Vas 2.4 ltrs
  • Sensitivity
    		• 2.83V/1m 89 dB

    Power Handling

  • 100h RMS noise test
    		• IEC 40 W

    Voice Coil and Magnet Parameters

  • Voice Coil Diameter
    		• 38 mm
  • Linear Excursion +/-
    		• 3 mm
  • Max mech. excursion +/-
    		• 7 mm

    Frequency
    Frequency

    Mechanical Dimensions

    Mechanical Dimensions

    Drawing Dimensions

  • Outside Diameter
    		• OD 115.5 mm
  • Flange Thickness
    		• FT 3 mm
  • Magnet Diameter
    		• MD 61 mm
  • Cutout Diameter
    		• CD 92 mm
  • Interior Depth
    		• ID 48.4 mm
  • Hole Diameter
    		• HD 4.2 mm
  • Screw Circle Diameter
    		• SD 103 mm

    The Revelator series has for years been celebrated for producing the best sounding electro dynamic transducers in the world. Since ScanSpeak was founded in 1970, the audio engineers and R&D experts working on the line have been on a quest to create drivers that reveal all the sound in recordings, hiding nothing from the listener. This quest has resulted in several revolutionary inventions that remove distortion in the magnet systems and in the moving parts of the speaker. The philosophy is that the sound has to be very dynamic, giving a perfect transient response and providing tonal balance. One of the latest inventions realized in the Revelator midrange design is the sliced paper cone, which reduces break-up modes in the membrane dramatically. The result is an undisputed clarity in sound.

    Driver Highlights: Low loss suspension, Sliced paper cone, Compact linear motor system

    Product Informatie PDF

    Specs

    Electrical Data

  • Nominal Impedance
    		• Zn 4 Ohm
  • DC Resistance
    		• Re 3.2 Ohm
  • Voice Coil Inductance
    		• Le 0.22mH

    TS Parameters

  • Resonance Frequency
    		• Fs 75 Hz
  • Mechanical Q factor
    		• Qms 5.57
  • Electrical Q factor
    		• Qes 0.35
  • Total Q factor
    		• Qts 0.33
  • Force Factor
    		• Bl 5.3 Tm
  • Mechanical Resistance
    		• Rms 0.55 Kg/s
  • Moving Mass
    		• Mms 6.5 g
  • Effective Piston Area
    		• sd 49 cm^2
  • Equivalent Volume
    		• Vas 2.4 ltrs
  • Sensitivity
    		• 2.83V/1m 89 dB

    Power Handling

  • 100h RMS noise test
    		• IEC 40 W

    Voice Coil and Magnet Parameters

  • Voice Coil Diameter
    		• 38 mm
  • Linear Excursion +/-
    		• 3 mm
  • Max mech. excursion +/-
    		• 7 mm

    Frequency
    Frequency

    Mechanical Dimensions

    Mechanical Dimensions

    Drawing Dimensions

  • Outside Diameter
    		• OD 115.5 mm
  • Flange Thickness
    		• FT 3 mm
  • Magnet Diameter
    		• MD 61 mm
  • Cutout Diameter
    		• CD 92 mm
  • Interior Depth
    		• ID 48.4 mm
  • Hole Diameter
    		• HD 4.2 mm
  • Screw Circle Diameter
    		• SD 103 mm
    Schrijf uw eigen beoordeling
    • Product kan alleen worden beoordeeld nadat het is gekocht
    • Alleen geregistreerde gebruikers kunnen een beoordeling schrijven
    *
    *
    Slecht
    Uitstekend
    Klanten die dit kochten, kochten ook.
    Afbeeldingen van Audyn 2.20 µF MKP+ 800V=

    Audyn 2.20 µF MKP+ 800V=

    1341760
    2.20 µF MKP+ 800V=
    €13,43 incl. BTW
    Exclusief verzenden
    Afbeeldingen van Audyn 68.0 µF MKP-kond. 400-V 5%

    Audyn 68.0 µF MKP-kond. 400-V 5%

    1341430
    68.0 µF MKP-kond. 400-V 5%
    €49,55 incl. BTW
    Exclusief verzenden
    Afbeeldingen van Audyn 1.00 µF MKP+ 800V=

    Audyn 1.00 µF MKP+ 800V=

    1341758
    1.00 µF MKP+ 800V=
    €10,12 incl. BTW
    Exclusief verzenden
    Afbeeldingen van Audyn 0.68 uF Kp-Sn 250V=

    Audyn 0.68 uF Kp-Sn 250V=

    1501135
    0.68 uF Kp-Sn 250V=
    €24,75 incl. BTW
    Exclusief verzenden
    Afbeeldingen van 1.00 mH HQR32 0.71 mm

    1.00 mH HQR32 0.71 mm

    1340250
    1.00 mH HQR32 0.71 mm
    €6,16 incl. BTW
    Exclusief verzenden
    Afbeeldingen van Audyn 0.56 mH Tritec, 7*0,50 mm

    Audyn 0.56 mH Tritec, 7*0,50 mm

    1500179
    0.56 mH Tritec, 7*0,50 mm
    €37,98 incl. BTW
    Exclusief verzenden
    Product beoordelingen
    Alleen geregistreerde gebruikers kunnen een beoordeling schrijven